Planck pre-launch status: Calibration of the Low Frequency Instrument flight model radiometers
EstadísticasView Usage Statistics
Full recordShow full item record
AuthorVilla, Fabrizio; Terenzi, Luca; Sandri, Maura; Meinhold, Peter R.; Poutanen, Torsti; Battaglia, Paola; Franceschet, Cristian; Hughes, Nicholas J.; Laaninen, Mikko; Lapolla, P. M.; Bersanelli, Marco; Butler, Reginald Christopher; Cuttaia, Francesco; D'Arcangelo, Ocleto; Frailis, Marco; Franceschi, Enrico; Galeotta, Samuele; Gregorio, Anna; Leonardi, Rodrigo; [et al.]
The Low Frequency Instrument (LFI) on-board the ESA Planck satellite carries eleven radiometer subsystems, called radiometer chain assemblies (RCAs), each composed of a pair of pseudo-correlation receivers. We describe the on-ground calibration campaign performed to qualify the flight model RCAs and to measure their pre-launch performances. Each RCA was calibrated in a dedicated flight-like cryogenic environment with the radiometer front-end cooled to 20 K and the back-end at 300 K, and with an external input load cooled to 4 K. A matched load simulating a blackbody at different temperatures was placed in front of the sky horn to derive basic radiometer properties such as noise temperature, gain, and noise performance, e.g. 1/f noise. The spectral response of each detector was measured as was their susceptibility to thermal variation. All eleven LFI RCAs were calibrated. Instrumental parameters measured in these tests, such as noise temperature, bandwidth, radiometer isolation, and linearity, provide essential inputs to the Planck-LFI data analysis.