Show simple item record

dc.contributor.authorTribak, Abdelwahed
dc.contributor.authorMediavilla Sánchez, Ángel 
dc.contributor.authorCepero Llauger, Karen
dc.contributor.authorBoussouis, Mohamed
dc.contributor.authorChaibi, Mohamed
dc.contributor.otherUniversidad de Cantabriaes_ES
dc.date.accessioned2013-07-30T12:52:59Z
dc.date.available2013-07-30T12:52:59Z
dc.date.issued2009-09
dc.identifier.urihttp://hdl.handle.net/10902/2801
dc.description.abstractA wideband diplexer is designed and constructed to demonstrate the feasibility of using stepped waveguide junctions for diplexer designs. It consists of two channel filters and a Tee E-plane junction. The relative bandwidth of the whole diplexer is about 64%. Two versions of this device has been constructed and tested in the C-band. The inputs and outputs return losses were less than -25dB, the isolation is > 80dB and the transmission loss was 0.1dB. Moreover, a manufacturing tolerance has been taken into account at the design step, and therefore, the designed diplexer need not be tuned after manufacture.es_ES
dc.format.extent4 p.es_ES
dc.language.isospaes_ES
dc.rights© 2009 URSI Españaes_ES
dc.sourceURSI 2009, XXIV Simposium Nacional de la Unión Científica Internacional de Radio, Santanderes_ES
dc.titleDuplexor banda ancha en tecnología de guía de onda para aplicaciones satélitees_ES
dc.typeinfo:eu-repo/semantics/conferenceObjectes_ES
dc.rights.accessRightsopenAccesses_ES
dc.type.versionpublishedVersiones_ES


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record