Design optimization for a passive mesh screen wave absorber for the CCOB

Ver/Abrir
Identificadores
URI: http://hdl.handle.net/10902/3783
ISBN: 978-0-9896611-1-9
Compartir
Estadísticas
Ver Estadísticas
Google Scholar
Registro completo
Mostrar el registro completo DC
Autoría
Klinghammer, Christian; Lomónaco Tonda, Pedro; Higuera Caubilla, Pablo
Fecha
2012-12-14
Derechos
Atribución 3.0 España
Publicado en
Coastal Engineering Proceedings, 2012,33, Proceedings of 33rd Conference on Coastal Engineering, Santander, Spain, 2012
Editorial
Coastal Engineering Research Council
Palabras clave
Passive wave absorber
Wave basin
IH-2VOF
Resumen/Abstract
A new passive wave absorber, consisting of multiple mesh screens, for the Cantabria Coastal and Ocean Basin (CCOB) was optimized regarding its overall length and performance. Physical model wave flume tests were conducted to calibrate and verify a 2D-RANS model utilizing different combinations of vertical and horizontal mesh screens. The final design of the main wave absorber at the back wall of the new CCOB was obtained by simulating different mesh screen configurations at full scale using the IH-2VOF model. Very good wave absorption over the entire working range of the wave basin could be achieved with a relatively short passive mesh screen wave absorber.
Colecciones a las que pertenece
Atribución 3.0 EspañaExcepto si se señala otra cosa, la licencia del ítem se describe como Atribución 3.0 España