Dezincification in cast and heat-treated alpha-beta brass samples

Abstract

Two A-B brass alloys with varying Zn contents have been studied. The samples received for examination were heat-treated at 500 °C in order to conduct dezincification studies according to EN ISO 6509-1 and to measure the depth of dezincification from metallographic sections.

According to the phase diagram, the A-phase content should increase as a result of heat-treatment at 500 °C. This phenomenon, however, is difficult to observe in the metallographic sections which were prepared from the heattreated samples. When analyzing the depth of dezincification, it was found that reduced dezincification occurred in the heat-treated samples. This is plausible since ? brass is attacked by preferential corrosion.

Not only was uniform layer dezincification observed in the brass alloy with the higher Zn content, but also the onset of plug dezincification. This is associated with the original microstructure of the brass which is characterized by a coarse primary grain size. In this alloy, it is clearly observed that larger areas containing alpha brass will impede the process of dezincification.