Single-longitudinal mode laser structure based on a very narrow filtering technique

Ver/Abrir
Identificadores
URI: http://hdl.handle.net/10902/2173
ISSN: 1094-4087
Compartir
Estadísticas
Ver Estadísticas
Google Scholar
Registro completo
Mostrar el registro completo DC
Autoría
Rodríguez Cobo, LuisAutoridad Unican; Quintela Incera, María ÁngelesAutoridad Unican; Rota Rodrigo, Sergio; López Amo, Manuel; López Higuera, José MiguelAutoridad Unican
Fecha
2013-04-22
Derechos
© 2013 Optical Society of America. This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/OE.21.010289. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.
Publicado en
Optics Express, 2013, 21(8), 10289–10294
Editorial
The Optical Society (OSA)
Enlace a la publicación
Palabras clave
Lasers, fiber
Lasers, erbium
Lasers, single-mode
Laser stabilization
Gratings
Resumen/Abstract
A narrow filtering technique based on the spectral overlapping of two uniform FBGs and applied to obtain a Single Longitudinal Mode (SLM) laser is proposed and demonstrated in this work. The two FBGs are spectrally detuned to reduce their coincident reflection response narrowing the equivalent filter bandwidth. A proof-of-concept linear laser has been built and tested exhibiting SLM operation even with temperature and strain variations.
Colecciones a las que pertenece