Design of a medium voltage distribution network
Projektowanie sieci rozdzielczej średniego napięcia
Diseño de una red de distribución de media tensión
Ver/ Abrir
Identificadores
URI: http://hdl.handle.net/10902/20942Registro completo
Mostrar el registro completo DCAutoría
Muriedas Ortiz, MarioFecha
2021-03-02Director/es
Derechos
Atribución-NoComercial-SinDerivadas 3.0 España
Palabras clave
Distribution network
RES (renewable energy sources)
Voltages
Currents
PowerWorld
Simulations
Sieć dystrybucyjna
OZE (odnawialne źródło energii)
Napięcia
Prądy
Symulacje
Red de distribución
RES (fuente de energía renovable)
Tensiones
Corrientes
Simulaciones
Resumen/Abstract
ABSTRACT: The main objective of the present work is the design and study of a medium voltage distribution network. The study consisted of designing with the help of PowerWorld a distribution network with a main generator and a network of loads that are connected at different nodes of the circuit. To this we must add several renewable energy sources at various points in the system. Using PowerWorld, we will simulate the system in different usage scenarios and compare voltages and currents to see how the system works and to be able to detect any possible anomalies.
ABSTRAKCYJNY: Głównym celem niniejszej pracy jest zaprojektowanie i zbadanie sieci dystrybucyjnej średniego napięcia. Badanie polegało na zaprojektowaniu za pomocą programu PowerWorld sieci dystrybucyjnej, w której znajduje się generator główny oraz sieć odbiorników, które są przyłączone w różnych węzłach obwodu. Do tego musimy dodać kilka odnawialnych źródeł energii w różnych punktach systemu. Używając oprogramowania PowerWorld przeprowadzimy symulację systemu w różnych scenariuszach użytkowania i porównamy napięcia i prądy, aby zobaczyć jak działa system i wykryć ewentualne anomalie.
RESUMEN: El objetivo principal del presente trabajo es el diseño y el estudio de una red de distribución de media tensión. El estudio consistió en diseñar con la ayuda de PowerWorld una red de distribución que cuente con un generador principal y una red de cargas que se conectan en diferentes nodos del circuito. A esto le debemos añadir varias fuentes de energía renovable en varios puntos del sistema. Utilizando el programa PowerWorld simularemos el sistema en distintos escenarios de uso y compararemos tensiones y corrientes para ver el funcionamento del sistema y poder detectar alguna posible anomalía.