Añadido recientemente

Small strain stiffness within logarithmic contractancy model for structured anisotropic clay.

Sivasithamparam, N.; D'Ignazio, M.; Tsegaye, A B; Castro Gonzalez, Jorge

; Madshus, C. (IOP Publishing Ltd., 2021-01)

Application of the incremental step loading technique to Small Punch Tests on S420 steel in acid environments

Arroyo Martínez, Borja

; Andrea Calvo, Laura; González Gutierrez, Pablo; Álvarez Laso, José Alberto

; Cicero González, Sergio

; Lacalle Calderón, Roberto

; Fernández Fernández, Álvaro (Elsevier B.V., 2020)

Fracture mechanics testing of irradiated RPV steels by means of sub-sized specimens: FRACTESUS project

Cicero González, Sergio

; Lambrecht, M.; Swan, H.; Arffman, P.; Altstadt, E.; Petit, T.; Obermeier, F.; Arroyo Martínez, Borja

; Álvarez Laso, José Alberto

; Lacalle Calderón, Roberto

(Elsevier B.V., 2020)

The role of the testing rate on Small Punch tests for the estimation of fracture toughness in hydrogen embrittlement

Arroyo Martínez, Borja

; Álvarez Laso, José Alberto

; Gutiérrez-Solana Salcedo, Federico

; Lacalle Calderón, Roberto

; Cicero González, Sergio

(Elsevier B.V., 2020)

Application of the Theory of the Critical Distances based methodology for the analysis of Environmentally Assisted Cracking processes in biomaterials

González Gutierrez, Pablo; Cicero González, Sergio

; Peron, M.; Arroyo Martínez, Borja

; Álvarez Laso, José Alberto

; Berto, F. (Elsevier B.V., 2020)

Graphene oxide does not seem to improve the fracture properties of injection molded

Cicero González, Sergio

; Parra Cubillos, Jessica Lorena; Arroyo Martínez, Borja

; Pessoa de Mendoca Procopio, Isabela (Elsevier B.V., 2020)

An extension of the Equivalent Material Concept applied to fracture of U-notched solids

Gómez, F.J.; Cicero González, Sergio

; Torabic, A.R. (Elsevier B.V., 2020)

On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior

Cicero González, Sergio

; Torabi, A.R.; Majidi, H.R.; Gómez, F.J. (Elsevier B.V., 2020)

Study of the effect of polyolefin-aramid fibers on PA mixture

Castro Fresno, Daniel

; Slebi Acevedo, Carlos José; Gupta, Anik

; Lastra González, Pedro

; Ruge-Cárdenas, Juan C. (2020)

Kraft and diamond dotted paper thermally aged in mineral oil and natural ester: mechanical characterisation

Fernández Diego, Cristina

; Ortiz Fernández, Alfredo

; Carrascal Vaquero, Isidro Alfonso

; Fernández Diego, Inmaculada

; Delgado San Román, Fernando

; Olmo Salas, Cristian

(Institute of Electrical and Electronics Engineers Inc., 2019)

Epoxy polymers reinforced with carbon microfibre wastes

Da Costa Dias, Thaís; Panzera, Túlio Hallak; Dos Santos, Julio Cesar; Freire, R. T. S.; Thomas García, Carlos

; Scarpa, Fabrizio (Elsevier, 2019)

Methodology for the Structural integrity assessment of the "Constitución de 1812" Bridge, over the Bay of Cádiz (Cádiz, Spain)

Díaz García, Manuel Ángel; Cicero González, Sergio

; Ramos Gutiérrez, Óscar Ramón

(Elsevier B.V., 2019)

Analysis of environmentally assisted cracking processes in notched steels using the point method

Cicero González, Sergio

; González Gutierrez, Pablo; Arroyo Martínez, Borja

; Álvarez Laso, José Alberto

(Elsevier B.V., 2019-09-09)

El ensayo small punch: alcance de la futura norma europea

Lacalle Calderón, Roberto

; Andrés Álvarez, David

; Álvarez Laso, José Alberto

(Secretaría del Grupo Español de Fractura, 2018)

Efecto de la velocidad de punzonado en la aplicación del ensayo small punch a la evaluación en fractura de la fragilización por hidrógeno en aceros

Arroyo Martínez, Borja

; Álvarez Laso, José Alberto

; Gutiérrez-Solana Salcedo, Federico

; Sainz, J.; González, P.; Lacalle Calderón, Roberto

(Secretaría del Grupo Español de Fractura, 2018)

Optimización de la geometría de la entalla lateral pasante en la estimación de la tenacidad a fractura mediante probetas small punch

Andrés Álvarez, David

; Lacalle Calderón, Roberto

; Jaurrieta Mellado, Ainhoa; Álvarez Laso, José Alberto

(Secretaría del Grupo Español de Fractura, 2018)

Rate effects on the estimation of fracture toughness by small punch tests in hydrogen embrittlement scenarios

Arroyo Martínez, Borja

; Álvarez Laso, José Alberto

; Lacalle Calderón, Roberto

; Gutiérrez-Solana Salcedo, Federico

(Ubiquity Press, 2018)

INCEFA-PLUS (Increasing safety in NPPs by Covering gaps in Environmental Fatigue Assessment)

Pessoa de Mendoca Procopio, Isabela; Cicero González, Sergio

; Mottershead, Kevin; Bruchhausen, Matthias; Cuvilliez, Sam (Elsevier B.V., 2018)

Analysis of stress corrosion cracking in X80 pipeline steel: An approach from the Theory of Critical Distances

González Gutierrez, Pablo; Cicero González, Sergio

; Álvarez Laso, José Alberto

; Arroyo Martínez, Borja

(Elsevier B.V., 2018)

El fomento de la innovación en el sector de la construcción

Rodríguez Santiago, Jesús; Amérigo Revuelta, Miguel; Thomas García, Carlos

(Asociación Científico-Técnica del Hormigón Estructural (ACHE), 2017-12)

D03 Congresos: Envíos recientes

Small strain stiffness within logarithmic contractancy model for structured anisotropic clay.

Application of the incremental step loading technique to Small Punch Tests on S420 steel in acid environments

Fracture mechanics testing of irradiated RPV steels by means of sub-sized specimens: FRACTESUS project

The role of the testing rate on Small Punch tests for the estimation of fracture toughness in hydrogen embrittlement

Application of the Theory of the Critical Distances based methodology for the analysis of Environmentally Assisted Cracking processes in biomaterials

Graphene oxide does not seem to improve the fracture properties of injection molded

An extension of the Equivalent Material Concept applied to fracture of U-notched solids

On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior

Study of the effect of polyolefin-aramid fibers on PA mixture

Kraft and diamond dotted paper thermally aged in mineral oil and natural ester: mechanical characterisation

Epoxy polymers reinforced with carbon microfibre wastes

Methodology for the Structural integrity assessment of the "Constitución de 1812" Bridge, over the Bay of Cádiz (Cádiz, Spain)

Analysis of environmentally assisted cracking processes in notched steels using the point method

El ensayo small punch: alcance de la futura norma europea

Efecto de la velocidad de punzonado en la aplicación del ensayo small punch a la evaluación en fractura de la fragilización por hidrógeno en aceros

Optimización de la geometría de la entalla lateral pasante en la estimación de la tenacidad a fractura mediante probetas small punch

Rate effects on the estimation of fracture toughness by small punch tests in hydrogen embrittlement scenarios

INCEFA-PLUS (Increasing safety in NPPs by Covering gaps in Environmental Fatigue Assessment)

Analysis of stress corrosion cracking in X80 pipeline steel: An approach from the Theory of Critical Distances

El fomento de la innovación en el sector de la construcción

Listar

Mi cuenta

Sobre UCrea

Piensa en abierto

Compartir

D03 Congresos: Envíos recientes

Small strain stiffness within logarithmic contractancy model for structured anisotropic clay. ﻿

Application of the incremental step loading technique to Small Punch Tests on S420 steel in acid environments ﻿

Fracture mechanics testing of irradiated RPV steels by means of sub-sized specimens: FRACTESUS project ﻿

The role of the testing rate on Small Punch tests for the estimation of fracture toughness in hydrogen embrittlement ﻿

Application of the Theory of the Critical Distances based methodology for the analysis of Environmentally Assisted Cracking processes in biomaterials ﻿

Graphene oxide does not seem to improve the fracture properties of injection molded ﻿

An extension of the Equivalent Material Concept applied to fracture of U-notched solids ﻿

On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior ﻿

Study of the effect of polyolefin-aramid fibers on PA mixture ﻿

Kraft and diamond dotted paper thermally aged in mineral oil and natural ester: mechanical characterisation ﻿

Epoxy polymers reinforced with carbon microfibre wastes ﻿

Methodology for the Structural integrity assessment of the "Constitución de 1812" Bridge, over the Bay of Cádiz (Cádiz, Spain) ﻿

Analysis of environmentally assisted cracking processes in notched steels using the point method ﻿

El ensayo small punch: alcance de la futura norma europea ﻿

Efecto de la velocidad de punzonado en la aplicación del ensayo small punch a la evaluación en fractura de la fragilización por hidrógeno en aceros ﻿

Optimización de la geometría de la entalla lateral pasante en la estimación de la tenacidad a fractura mediante probetas small punch ﻿

Rate effects on the estimation of fracture toughness by small punch tests in hydrogen embrittlement scenarios ﻿

INCEFA-PLUS (Increasing safety in NPPs by Covering gaps in Environmental Fatigue Assessment) ﻿

Analysis of stress corrosion cracking in X80 pipeline steel: An approach from the Theory of Critical Distances ﻿

El fomento de la innovación en el sector de la construcción ﻿

Small strain stiffness within logarithmic contractancy model for structured anisotropic clay.

Application of the incremental step loading technique to Small Punch Tests on S420 steel in acid environments

Fracture mechanics testing of irradiated RPV steels by means of sub-sized specimens: FRACTESUS project

The role of the testing rate on Small Punch tests for the estimation of fracture toughness in hydrogen embrittlement

Application of the Theory of the Critical Distances based methodology for the analysis of Environmentally Assisted Cracking processes in biomaterials

Graphene oxide does not seem to improve the fracture properties of injection molded

An extension of the Equivalent Material Concept applied to fracture of U-notched solids

On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior

Study of the effect of polyolefin-aramid fibers on PA mixture

Kraft and diamond dotted paper thermally aged in mineral oil and natural ester: mechanical characterisation

Epoxy polymers reinforced with carbon microfibre wastes

Methodology for the Structural integrity assessment of the "Constitución de 1812" Bridge, over the Bay of Cádiz (Cádiz, Spain)

Analysis of environmentally assisted cracking processes in notched steels using the point method

El ensayo small punch: alcance de la futura norma europea

Efecto de la velocidad de punzonado en la aplicación del ensayo small punch a la evaluación en fractura de la fragilización por hidrógeno en aceros

Optimización de la geometría de la entalla lateral pasante en la estimación de la tenacidad a fractura mediante probetas small punch

Rate effects on the estimation of fracture toughness by small punch tests in hydrogen embrittlement scenarios

INCEFA-PLUS (Increasing safety in NPPs by Covering gaps in Environmental Fatigue Assessment)

Analysis of stress corrosion cracking in X80 pipeline steel: An approach from the Theory of Critical Distances

El fomento de la innovación en el sector de la construcción