• Tensile strength of rocks: comparison of different testing methods 

  Castro Gonzalez, Jorge; Justo Urrutia, Jon; Olson, Meagan Hannah; Miranda Manzanares, Marina (CRC Press, 2024)

• Assessment of stiffness parameters of stone columns 

  Carvajal Díaz, E.; Ruiz-Terán, P.; Castro Gonzalez, Jorge; Miranda Manzanares, Marina (2024)

• Numerical analyses of the optimum length of stone columns and their encasements 

  Castro Gonzalez, Jorge; Miranda Manzanares, Marina; Márquez Martínez, Alberto; Fernández-Ruiz, J.; Melentijevic, S. (2024)

• Application of computational fluid dynamics for the analysis of the furnace effect in the determination of the temperature of high temperature fixed points 

  Castro Alonso, Pablo Bernardo; Pozo Mesones, César del; Machin, Graham (American Institute of Physics, 2024-10-18)

• Using the point method to estimate failure loads in 3D printed graphene-reinforced PLA notched plates 

  Cicero González, Sergio; Arrieta Gómez, Sergio; Sánchez Matías, Marcos; Castañón Jano, Laura (Institute of Physics, 2024)

• Measuring energy in dynamic probing 

  Ibáñez García, Sergio J.; Sagaseta Millán, César; López, V. (CRC Press, 2013)

• Landslide hazard scenarios based on both past landslides and precipitation 

  Remondo Tejerina, Juan; Bonachea Pico, Jaime; Rivas Mantecón, María Victoria; Sánchez Espeso, Javier María; Bruschi, Viola María; Cendrero Uceda, Antonio; Díaz de Terán Mira, José Ramón; Fernández Maroto, Gema; Gómez Arozamena, José Ezequiel; González Díez, Alberto; Sainz Fernández, Carlos (2017)

• Studying a landslide in its paroxysmal phase; the reactivation of the Sebrango landslide (Spain), June 2013 

  González Díez, Alberto; Bruschi, Viola María; Sánchez Espeso, Javier María; Bonachea Pico, Jaime; Díaz de Terán Mira, José Ramón; Remondo Tejerina, Juan; Fernández Maroto, Gema; Martínez Cedrún, Patricio; Zarroca, M.; Linares, R.; Rodríguez Mangas, Verónica; San Millán Revuelta, Eliezer; Cendrero Uceda, Antonio; Hoyos Riaño, Sonia; Martín, S. (2017)

• The Application of ERT for the Geometrical Analysis of the Sebrango Landslide, (Cantabrian Range, Spain) 

  González Díez, Alberto; Zarroca, M.; Linares, R.; Bruschi, Viola María; Bonachea Pico, Jaime; Díaz de Terán Mira, José Ramón; Remondo Tejerina, Juan; Fernández Maroto, Gema; Martínez Cedrún, Patricio; Sánchez Espeso, Javier María; Martín, S. (2017)

• The impact of thermal ageing on the compression strength of radial spacers in power transformers 

  Oria Alonso, Carmela; Ortiz Fernández, Alfredo; Méndez Gutiérrez, Cristina; Carrascal Vaquero, Isidro Alfonso; Ferreño Blanco, Diego (Institute of Electrical and Electronics Engineers, Inc., 2023)

• Estimation of fracture loads in 3D printed PLA notched specimens using the ASED criterion 

  Arrieta Gómez, Sergio; Cicero González, Sergio; Sánchez Matías, Marcos; Castañón Jano, Laura (Elsevier B.V., 2023)

• A modification of the Norris failure criterion for the prediction of the mechanical failure of the aged paper insulation in the windings of a power transformer 

  Oria Alonso, Carmela; Ferreño Blanco, Diego; Carrascal Vaquero, Isidro Alfonso; Ortiz Fernández, Alfredo; Fernández Diego, Inmaculada (Institute of Electrical and Electronics Engineers, Inc., 2022)

• Master curve evaluation of ANP-5 steel using mini-CT specimens 

  Sánchez Matías, Marcos; Cicero González, Sergio; Arroyo Martínez, Borja; Arrieta Gómez, Sergio (Elsevier B.V., 2022)

• FRACture mechanics TEsting of irradiated RPV steels by means of SUb-sized Specimens: FRACTESUS PROJECT 

  Sánchez Matías, Marcos; Cicero González, Sergio; Arroyo Martínez, Borja; Arrieta Gómez, Sergio (Elsevier B.V., 2022)

• Caracterización en fractura de aceros de vasija mediante probetas mini-CT y Small Punch. Primeros pasos del proyecto europeo FRACTESUS 

  Arroyo Martínez, Borja; Cicero González, Sergio; Lambrecht, M.; Swan, H.; Arffman, P.; Altstadt, E.; Petit, T.; Obermeier, Stephen F. (Sociedad Espanñola de Integridad Estructural. Grupo español de Fractura, 2021-07)

• INCEFA-SCALE (INcreasing Safety in NPPs by Covering Gaps in Enviro Assessment-Focusing on Gaps between Laboratory Data and Component-SCALE) 

  Arrieta Gómez, Sergio; Cicero González, Sergio; Mottershead, K.; Cicero González, Román; McLennan, A.; Courtin, S.; Huotilainen, C. (Sociedad Espanñola de Integridad Estructural. Grupo español de Fractura, 2021-06)

• Assessment of notched Polyvinyl chloride (PVC) tubular beams using the Theory of Critical Distances and Finite Element analysis 

  Sánchez Matías, Marcos; Cicero González, Sergio; Arroyo Martínez, Borja (Elsevier B.V., 2021)

• Some thoughts about the application of the Master Curve methodology to ferritic steels containing notches 

  Cicero González, Sergio; Arrieta Gómez, Sergio (Elsevier B.V., 2021)

• Effect of graphene on the fracture behaviour of 3D printed PLA SENB specimens 

  Martínez Mata, Víctor; Cicero González, Sergio; Arroyo Martínez, Borja (Elsevier B.V., 2021)

• Multi-wall carbon nanotubes do not necessarily improve the fracture behaviour of the epoxy matrix 

  Sánchez Matías, Marcos; Cicero González, Sergio (Elsevier B.V., 2021)

Ver más