Mostrar el registro sencillo

dc.contributor.authorRamírez Terán, Franco Ariel 
dc.contributor.authorSancho Lucio, Sergio Miguel 
dc.contributor.authorPontón Lobete, María Isabel 
dc.contributor.authorSuárez Rodríguez, Almudena 
dc.contributor.otherUniversidad de Cantabriaes_ES
dc.date.accessioned2019-01-31T19:37:02Z
dc.date.available2019-01-31T19:37:02Z
dc.date.issued2018-12
dc.identifier.issn0018-9480
dc.identifier.issn1557-9670
dc.identifier.otherTEC2014-60283-C3-1-Res_ES
dc.identifier.otherTEC2017-88242-C3-1-Res_ES
dc.identifier.urihttp://hdl.handle.net/10902/15607
dc.description.abstractThe response of chirped oscillators under the injection of independent signals, for spectrum sensing in cognitive radio, and under self-injection, for radio frequency identification, is analyzed in detail. The investigation is performed by means of a semianalytical formulation, based on a realistic modeling of the free-running oscillator, extracted from harmonic-balance simulations or from experimental measurements, through a new characterization technique. In the new formulation, the oscillator is linearized about a free-running solution that varies with the control voltage. This enables its application to oscillators having a frequency characteristic that deviates from the linear one. In the case of injection by independent signals, the two-scale envelope-domain formulation will enable an efficient handling of the difference between the slow chirp frequency and the beat frequency. The input carriers can be detected from their dynamic synchronization intervals or, at lower input-power levels, from the dynamics of the beat frequency. Noise perturbations are introduced into the formulation, which enables an estimation of the minimum detectable signal. In the case of a self-injected oscillator for radio frequency identification, an insightful formulation is derived to predict the propagation and tag-resonance effects on the instantaneous oscillation frequency. The tag-resonance signature gives rise to a distinct modulation of the oscillation frequency during the chirp period, which can be detected from the variation of the oscillator bias current. The analysis methods are illustrated through their application to a chirped oscillator, operating in the band 2-3 GHz.es_ES
dc.description.sponsorshipThis work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (ERDF/FEDER) under Project TEC2014-60283-C3-1-R and Project TEC2017-88242-C3-1-Res_ES
dc.format.extent14 p.es_ES
dc.language.isoenges_ES
dc.publisherInstitute of Electrical and Electronics Engineers Inc.es_ES
dc.rights© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.es_ES
dc.sourceIEEE Transactions on Microwave Theory and Techniques, 2018, 66(12), 5449-5461es_ES
dc.sourceIEEE MTT-S International Microwave Symposium (IMS), Philadelphia, USA, 2018
dc.subject.otherChirp signales_ES
dc.subject.otherInjection lockinges_ES
dc.subject.otherOscillatores_ES
dc.titleTwo-scale envelope-domain analysis of injected chirped oscillatorses_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.relation.publisherVersionhttps://doi.org/10.1109/TMTT.2018.2868661es_ES
dc.rights.accessRightsopenAccesses_ES
dc.identifier.DOI10.1109/TMTT.2018.2868661
dc.type.versionacceptedVersiones_ES


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo