• Mi UCrea
    Ver ítem 
    •   UCrea
    • UCrea Investigación
    • Departamento de Ingeniería de Comunicaciones (DICOM)
    • D12 Proyectos de Investigación
    • Ver ítem
    •   UCrea
    • UCrea Investigación
    • Departamento de Ingeniería de Comunicaciones (DICOM)
    • D12 Proyectos de Investigación
    • Ver ítem
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Stability criteria for power amplifiers under mismatch effects

    Ver/Abrir
    StabilityCriteriafor ... (400.1Kb)
    Identificadores
    URI: http://hdl.handle.net/10902/10110
    DOI: 10.1109/MWSYM.2015.7166988
    ISBN: 978-1-4799-8276-9
    ISBN: 978-1-4799-8275-2
    Compartir
    RefworksMendeleyBibtexBase
    Estadísticas
    Ver Estadísticas
    Google Scholar
    Registro completo
    Mostrar el registro completo DC
    Autoría
    Suárez Rodríguez, AlmudenaAutoridad Unican; Ramírez Terán, Franco ArielAutoridad Unican; Sancho Lucio, Sergio MiguelAutoridad Unican
    Fecha
    2015
    Derechos
    © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
    Publicado en
    IEEE MTT-S International Microwave Symposium (IMS), Phoenix, Arizona, 2015, 1041-1044
    Editorial
    IEEE
    Enlace a la publicación
    https://dx.doi.org/10.1109/MWSYM.2015.7166988
    Palabras clave
    Stability analysis
    Bifurcation
    Antenna mismatch
    Resumen/Abstract
    Potential instability of power amplifiers (PAs) under mismatch effects is analyzed, with emphasis on the impact of the PA termination at the fundamental frequency. A large-signal version of the μ factor is derived, considering the lower and upper sideband of the fundamental frequency as virtual observation ports. This requires the application of the conversion matrix approach to each steady-state solution obtained with harmonic balance when varying the fundamental termination. To evaluate the impact of the fundamental output load, a contour technique is used to assemble loads giving the same μ value. A stabilization procedure is provided, based on the mapping of the mismatched load onto the stable region of the fundamental termination Smith chart. The analysis is extended to consider the baseband frequency, using three virtual observation ports.
    Colecciones a las que pertenece
    • D12 Congresos [595]
    • D12 Proyectos de Investigación [519]

    UNIVERSIDAD DE CANTABRIA

    Repositorio realizado por la Biblioteca Universitaria utilizando DSpace software
    Contacto | Sugerencias
    Metadatos sujetos a:licencia de Creative Commons Reconocimiento 4.0 España
     

     

    Listar

    Todo UCreaComunidades y coleccionesFecha de publicaciónAutoresTítulosTemasEsta colecciónFecha de publicaciónAutoresTítulosTemas

    Mi cuenta

    AccederRegistrar

    Estadísticas

    Ver Estadísticas
    Sobre UCrea
    Qué es UcreaGuía de autoarchivoArchivar tesisAcceso abiertoGuía de derechos de autorPolítica institucional
    Piensa en abierto
    Piensa en abierto
    Compartir

    UNIVERSIDAD DE CANTABRIA

    Repositorio realizado por la Biblioteca Universitaria utilizando DSpace software
    Contacto | Sugerencias
    Metadatos sujetos a:licencia de Creative Commons Reconocimiento 4.0 España