@article{10902/23347,
year = {2021},
month = {11},
url = {http://hdl.handle.net/10902/23347},
abstract = {Non-enzymatic amperometric glucose sensors have gained much attention in the past decade because of the better chemical and thermal stability and biocompatibility compared to conventional sensors based on the use of biomolecules. This study focuses on a novel copper and copper oxide-based glucose sensor synthesized by an electrodeposition technique through a rigorous protocol which reports an excellent analytical performance due to its structure and its increased active area. In addition, the linear response range, detection limit and sensitivity were 0.5–5.0 mmol L−1, 0.002 mmol L−1, 904 μA mmol−1 L−1 cm−2, respectively. Results show a reliable electrode as it is chemically stable, exhibits rapid and excellent sensitivity, and it is not significantly affected by coexisting species present in the blood samples; furthermore, it reports a maximum relative standard deviation error (RSD) of 6%, and showed long operating life as the electrode was used for thousand measurements of 4.0 mmol L−1 glucose solution during three days.},
organization = {This research was funded by the Spanish Ministry of Science, Innovation, and Universities under the project RTI2018-093310-B-I00, grant Concepción Arenal from the University of Cantabria.},
publisher = {MDPI},
publisher = {Applied Sciences, 2021, 11(22), 10830},
title = {Non-enzymatic amperometric glucose screen-printed sensors based on copper and copper oxide particles},
author = {Guati de Cabo, Carlota and Gómez Coma, Lucía and Fallanza Torices, Marcos and Ortiz Uribe, Inmaculada},
}