@article{10902/21664,
year = {2021},
month = {4},
url = {http://hdl.handle.net/10902/21664},
abstract = {The allocation of part of the UHF band to 4G and 5G services has generated the appearance of channel interferences over the digital terrestrial television frequency band. In order to reduce these interferences, this work presents a novel and efficient band-stop filter implemented using microstrip technology. The filter, designed with rectangular split-ring resonators etched in the ground plane, provides a cutoff frequency above channel 48 (694 MHz), a high roll-off rate of 44 dB in 56 MHz and a rejection bandwidth of 250 MHz that covers the upper UHF band occupied by 4G and 5G with rejection levels close to 35 dB. The filter is manufactured entirely over a printed circuit board without lumped elements to reduce production costs, fine tuning after the assembly stage and maintenance. Moreover, it presents a compact subwavelength size of only 0.07 λ × 0.17 λ to facilitate installation, whether at the input of the TV terminal or integrated with the balun at the rooftop antenna.},
organization = {This research was funded in part by the Ministerio de Ciencia, Innovación y Universidades
and in part by the European Regional Development Fund under Grant PGC2018-098350-B-C22.},
publisher = {MDPI},
publisher = {Electronics, 2021, 10(8),  974},
title = {Compact low-cost filter for 5G interference reduction in UHF broadcasting band},
author = {Fernández Fernández, Óscar and Fernández Ibáñez, Tomás and Gómez Gómez, Álvaro},
}